 FOR HOLE ALIGNING, ENLARGING AND FINISHING |
 |
HIGH SPEED STEEL AND ACCURATE REAMER DIAMETER Cuts most materials. Accurate reamer diameter for size and finish. |
|
|
 |
NARROW POINT DIAMETER AND MULTIFLUTE CUTTING N.P.D. allows maximum range for nlargement, Multiflute cutting spreads loads evenly, for smooth operation. |
| PARALLEL SHANK AND SAFETY COLLAR Allows for attachment to portable ower tools, with the safety collar preventing over-penetration. |
 |
|
LONG TAPER AND L.H. HELIX The L.H. helix pushes chips way and revents tool drag. Taper allows side cutting for alignment. |
|
 FEATURES AND BENEFITS |
|
| SIZE | POINT Ø | FLUTE LENGTH |
OVERALL LENGTH |
| 10 mm 3/8" |
5.23 mm .193" |
76 mm 3" |
127 mm 5" |
| 12 mm 1/2" |
5.61 mm .236" |
102 mm 3 15/16" |
152 mm 5 15/16" |
| 14 mm 5/8" |
7.82 mm .264" |
102 mm 4 1/2" |
152 mm 6 9/16" |
| 18 mm 3/4" |
9.19 mm .458" |
125 mm 4 15/16" |
178 mm 7" |
| 22 mm 7/8" |
12.98 mm .585" |
132 mm 5 3/16" |
184 mm 7 1/4" |
| 26 mm 1" |
17.20 mm .713" |
132 mm 5 3/16" |
184 mm 7 1/4" |
|
|
 |
 |
 |
 |
 |
 |
 |
t: +44 (0) 1484 665321 e: reamers@taylorandjones.co.uk